• Home Healthcare & Family Caregiving – For patients discharged from hospital needing a community bed with manual adjustability.
• Long-Term Residential Care – Nursing homes seeking durable, easy-to-clean manual profiling beds with side rails.
• Bariatric Care Units – Heavy-duty bariatric manual beds supporting up to 300kg, with extra width and reinforced frames.
• Palliative & Hospice Care – Quiet-operating hand crank beds that maintain a homely environment while offering clinical functionality.
• Dementia & Mental Health Wards – Low medical beds with floor-level safety positions and removable side rails to reduce fall risks.
• Emergency Preparedness & Military Medicine – Manual beds that function without electricity in field hospitals or disaster relief settings.

• Frame: Heavy-duty steel tube (thickness ≥2.0mm) with a maximum patient weight capacity of 180kg (standard) and up to 300kg for bariatric models.
• Side rails: ABS or aluminum alloy, half-length or full-length options, compliant with MHRA guidance on entrapment risk reduction.
• Mattress platform: Perforated steel panels for breathability and easy cleaning.
• Hand crank mechanism: Genuine cold-rolled steel gears with overload protection, tested for 10,000+ cycles.
• Castors: 100mm or 125mm twin-wheel conductive castors (brakes on two or four corners as required).
• Head & foot boards: Removable ABS or wooden-finished boards, impact-resistant and easy to sanitize.

Scenario 1: Hospital-to-Home Discharge & Community Care

After a stroke or hip surgery, patients often need a height-adjustable bed to assist with transfers. Our manual height-adjustable bed allows home caregivers to lower the bed to 22cm from the floor to prevent fall injuries, or raise it to 80cm for comfortable nursing. Unlike electric models, there’s no risk of control box failure. For VAT relief-eligible users, we offer simple documentation support.

Scenario 2: Dementia & High-Fall-Risk Patients

Low medical beds (ultra-low profile down to 15–25cm) are crucial for dementia wards. Our low manual bed features a 4-section hand crank that lowers the entire chassis close to the floor while still enabling backrest and knee-break adjustments. Optional floor-level crash mats provide additional security. The side rails can be removed entirely to prevent climbing risks – fully compliant with MHRA guidance on safe use of bed rails.

Scenario 3: Bariatric & Plus-Size Care

For patients over 180kg, a standard bed is unsafe. Hengyuan Medical’s bariatric manual bed offers a 120cm wide platform, 300kg weight capacity, and extended hand crank levers for easier operation. The reinforced steel frame and extra-thick pressure redistribution mattress prevent pressure ulcers while maintaining stability.

Scenario 4: Palliative Care at Home

Families caring for a terminally ill relative often prefer a quiet, non-mechanical bed. A hand crank bed from Hengyuan Medical operates silently, promoting a peaceful environment. The profiling bed functions (backrest angle 0-75°, leg rest 0-40°) help with respiratory drainage and pressure relief without disturbing the patient’s sleep.

Step 1: Assess Patient’s Clinical Needs

Consider mobility, fall risk, pressure ulcer history, and respiratory condition. For patients with high pressure ulcer risk, combine our manual profiling bed with a pressure relief mattress (static foam or dynamic alternating if available). For severe dementia, choose a low medical bed with floor-level setting.

Step 2: Determine Required Adjustability

Manual profiling beds usually offer three main adjustments (backrest, knee-break, height) via separate hand cranks. Some models also allow Trendelenburg position (legs higher than head). If full Trendelenburg is clinical necessary, confirm with our engineers.

Step 3: Evaluate Safety Features – Side Rails & MHRA Compliance

All side rails must be chosen after a MHRA guidance risk assessment. Hengyuan Medical provides openable side rails with safe release mechanisms. For confused patients, consider half-length rails positioned only at the head end to reduce entrapment risk.

Step 4: Measure Room & Door Frame Dimensions

A community bed for home use must pass through standard doorways (min 80cm clearance). Our beds come in sections (head, foot, side rails separate) for easy assembly. We can advise on installation for upstairs rooms.

Step 5: Budget & VAT Relief

As a direct medical manual bed supplier, we eliminate distributor markups. For UK private buyers with chronic illness (e.g., arthritis, multiple sclerosis, stroke recovery), we support VAT relief (20% off). Institutional purchases (NHS Trusts, registered charities) may also qualify for VAT exemptions.

Step 6: Accessories & Pressure Care Integration

Complete your setup with overbed tables, patient poles, bed bumpers, wall protectors, and compatible pressure care mattresses. Our mattresses feature high-resilience foam, viscoelastic memory foam, or alternating air systems with matching weight capacity.

Case Study 1: UK-Based Nursing Home Chain (50+ beds)

A 120-bed nursing home in Manchester replaced aging, frequently failing electric beds with Hengyuan Medical’s manual profiling beds. The result: maintenance costs dropped by 73% in 18 months, and caregivers reported easier height adjustment due to well-located hand cranks. The home saved over £30,000 annually in repair contracts. As their dedicated medical manual bed supplier, we provided custom side rail configurations to comply with CQC standards.

Case Study 2: Home Care for a ALS Patient in California, USA

Mr. David, living with ALS, needed a reliable bed that could be adjusted by his wife without electricity (frequent power cuts in rural area). We supplied a hand crank hospital bed with a low-height option and a pressure relief mattress. The manual backrest allowed Mrs. David to reposition her husband easily for meals and breathing assistance. “The bed changed our lives – simple, safe, and dependable,” she wrote.

Case Study 3: Kenyan Mission Hospital

A 200-bed mission hospital in rural Kenya required 40 durable beds for a new ward. Electricity was unreliable, so they ordered our manual bariatric beds and standard manual profiling beds. The hospital’s procurement manager noted: “Hengyuan Medical is the only medical manual bed supplier that delivered full technical documentation, spare parts kits, and training videos for hand crank maintenance.”

• OEM & ODM Capabilities: We customize color, logo, bed width, side rail style, and crank position.
• Regulatory Readiness: All beds meet ISO 13485, UKCA, and CE standards; we provide documents for NHS procurement.
• Logistics & Delivery: Sea, air, or rail freight; delivery to warehouse or room of choice (with local partners).
• After-Sales Support: 5-year warranty on frame, 2-year on mechanical parts; technical videos; remote troubleshooting.
• Bulk & Institutional Discounts: For 10+ beds, contact us for a customized quotation.

Email: [email protected]
WhatsApp: +8619112802244
Web: medfurni.com
Office Hours: Monday–Saturday (GMT+8) – we respond within 6 hours.